SHARE

Do Low Flow Showerheads Save Water?

Posted by Bill Gauley and John Koeller on March 20, 2017
Do Low Flow Showerheads Save Water?

Did you know that, on average, people take 0.69 showers per day?

Did you know that the average shower lasts 7.8 minutes?

Did you know that showering uses a lot of water? Showering currently accounts for almost 20% of all indoor residential water demand!

There is no question that many people want to be environmentally responsible and use our natural resources—including water—more efficiently. But do low flow showerheads actually save water? Or do lower flow rates simply mean people take longer showers—thus negating any potential water savings?

To answer this question, Bill Gauley and John Koeller analyzed data for more than 50,000 shower events [1]! Shower volumes were determined by multiplying the flow rate by the duration. The results were very clear (see Figure 1 below).

  • People do not significantly compensate for lower flow rates by increasing the length of their shower. For every 0.2 gallon per minute (gpm) decrease in flow rate, shower duration only increased by about 5 seconds.
  • Lower flow showerheads do result in a lower overall shower volume. For every 0.2 gpm decrease in flow rate, shower volume decreased by 1.34 gallons

In fact, it seems that people tend to follow their own unique routine for showering regardless of the flow rate of the showerhead (at least for those showers between flow rates of 1.0 to 4.0 gpm). For example, if you take an 8-minute shower with a flow rate of 2.5 gpm (the current federal standard), then you are likely to take an 8-minute and 12-second shower with a flow rate of 2.0 gpm (the current U.S. EPA WaterSense® standard). But the total water used during your shower will decline from 20.0 gallons to only about 16.4 gallons!

While studies have shown that people tend to prefer higher flow rate showerheads [2], the results of this analysis clearly show that water savings can be achieved by using lower flow rate showerheads. As a result, water and energy utilities interested in achieving higher levels of water savings are rebating high-performance low flow rate showerheads.

The complete report can be found here.

Please send any questions to the authors:

Bill Gauley, P.Eng., Principal, Gauley Associates Ltd., bill@gauley.ca

John Koeller, P.E., Principal, Koeller & Company, koeller@earthlink.net

 

[1] Data from 1999 and 2016 Residential End Uses of Water Studies (REUS1999 and REUS2016) completed by Aquacraft, Inc.  Data provided by Co-Principal Investigator, Peter Mayer, P.E.

[2] High-Efficiency Showerhead Performance Study, 2009, Gauley, Robinson, Elton.  Report can be found at: http://www.map-testing.com/assets/files/Veritec-Waterloo%20Final%20Report%20Dec%202009%20copy.pdf

Comments
Add a new blog comment!

Enter your comments in the box below:

(Please note that all blog entries and comments are subject to review prior to posting.)

 

<< Back to blogs

While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.

SPONSORED CONTENT What is Home Performance? Learn about the largest association dedicated to home performance and weatherization contractors. Learn more! Watch Video