1. Did you utilize any other moisture barrier over the OSB other than the 2-inch rigid foam? I am also curious what you used for the cladding/ siding on your house and if it required air ventilation.
2. Did you create an air space between the exterior cladding and the 2-inch rigid foam? Here in the Northwest we utilize this air space in order to keep the siding material (wood, most commonly) as dry as possible on both sides. We usually accomplish this by using pressure-treated 1-inch strapping over the sheathing.
3. With the thicker wall system in your Ohio home, did you experience any problems with window installation? Did you utilize a nailing fin-type window or a jamb-mounted window system? I assume that the nail fin was attached at the exterior face of the rigid foam (drainage plane), if this was the window type used. Following the recommendations of Joe Lstiburek of Building Science Corporation (and now most of the moisture barrier manufacturers), flashing the window around the nailing fin to the drainage plane is the best way to go. I’m curious how you detailed this while building your house.
Lopez Island, Washington
A. The exterior cladding of my home in Ohio is vinyl siding. As you know, vinyl siding is back vented by design, structure, and installation, and this simplifies the exterior-wall detail. Therefore, I was able to (1) have the 2-inch rigid foam (taped at the joints) function as the drainage plane, and (2) apply the siding directly to the foam. Given the 2-inch thickness of the foam, I had the siding subcontractor use 3-inch nails spaced 12 inches on center (siding manufacturers typically recommend 16-inch spacing) and placed so that every other nail penetrated through the OSB into a stud (exterior wall studs are spaced 24 inches on center). The lack of moisture-related problems is a major advantage of vinyl siding. Other practical advantages include durability, low maintenance, ease and simplicity of installation, and low cost. It is sometimes said that vinyl siding is not green. Betsy Pettit (of Building Science Corporation) did an excellent job of addressing this topic in her response to a reader who asked this very question in the June 2005 issue of Fine Homebuilding magazine (p. 102) a couple of years ago. Petit made the following points:
• All materials have environmental costs associated with their use. In her experience as a building performance consultant, problems with wood siding not being installed correctly and therefore failing prematurely are common.
• She has never investigated a moisture- or mold related problem with vinyl siding.
• The use of recycled content in manufacturing vinyl siding, and recycling at the job site and at replacement, are all becoming more common.
After discussing in detail the real-world pros and cons of vinyl siding versus wood and other materials, Pettit concludes that, yes, vinyl can be green, and I agree.
The windows that I used on my house had nailing fins. I was not comfortable mounting the nailing fins directly to the 2-inch rigid foam. Therefore, windows are attached to 2 X 2 strips of wood placed around the rough openings in picture frame fashion. Self-adhesive membrane strips function as the window fl ashing, with the sill piece applied prior to window installation and the sides and top pieces applied after window installation. This technique for window installation and fl ashing proved to be very effective and problem-free.
Enter your comments in the box below:
(Please note that all comments are subject to review prior to posting.)
While we will do our best to monitor all comments and blog posts for accuracy and relevancy, Home Energy is not responsible for content posted by our readers or third parties. Home Energy reserves the right to edit or remove comments or blog posts that do not meet our community guidelines.