Soft Water, Strong Odor
A version of this article appears in the May/June 2005 issue of Home Energy Magazine.
May 01, 2005
Q. I have a gas-fueled direct-vent hot water tank. It has been in service since September 2003. I have a water softener as well.We get our water from a well. Before being softened, the water has a hardness reading of 33 grains. My hot water has a reading of 1 grain of hardness after softening. My cold water is 0 grains. Before I went away for 13 days, I set the temperature to the lowest setting. Upon my return, the hydrogen sulfide smell could knock you out! Finally, the smell has almost entirely dissipated. I have some questions: I understand that you can replace the standard magnesium anode with an aluminum anode and not get the bad smell. Are there any drawbacks to going to aluminum? Is it correct that the anode rod needs to be replaced every 1 to 2 years? If I am going to be gone for an extended period of time, can I just turn off the gas to the tank till I get back? The tank is located in the basement. The winters do bring below freezing ...
To read complete online articles, you need to sign up for an Online Subscription.
Once an order has been placed there is an automatic $10 processing fee that will be deducted with any cancellation.
The Home Energy Online articles are for personal use only and may not be printed for distribution. For permission to reprint, please send an e-mail to email@example.com.