Variable Capacity Versus Fixed Capacity
A version of this article appears in the March/April 2014 issue of Home Energy Magazine.
March 01, 2014
An Experiment in the Impact of Duct Location
A new generation of fully variable-capacity HVAC units has come on the market, and they promise to deliver very high cooling efficiency. They are controlled differently than standard single-capacity systems. Instead of cycling on at full capacity and then cycling off when the thermostat is satisfied, they can vary their capacity over a wide range, thus staying on for nearly twice as many hours per day as single-capacity systems. These systems have a greater impact on conductive losses of the duct system, because cold air dwells in the ductwork (commonly located in the attic or other unconditioned space) for longer periods of time.
To read complete online articles, you need to sign up for an Online Subscription.
Once an order has been placed there is an automatic $10 processing fee that will be deducted with any cancellation.
The Home Energy Online articles are for personal use only and may not be printed for distribution. For permission to reprint, please send an e-mail to firstname.lastname@example.org.