Standby for Set-Top Boxes
A version of this article appears in the November/December 2001 issue of Home Energy Magazine.
November 01, 2001
Set-top boxes have the highest standby power consumption found in home appliances. Thanks to the upcoming change to digital TV formats,many consumers will be forced to either purchase or rent set-top boxes. Consumer Reports (CR) recently (September 2001) tested a wide range of set-top boxes for satellite systems. For the first time,CR also listed the standby power consumption of the units. We supplemented the data with Lawrence Berkeley National Laboratory measurements of cable boxes and the proposed specifications for Energy Star boxes (see Table 1). Energy Star calls for significant reductions,but not for a few years,when the level will fall to 7 watts for all devices. The standby levels range from 10W–40W, but many are above 30W. The highest consumers are units equipped with digital videodisk recorders—often called “TiVo”—designed to record pre–selected program material. These units don’t even have off switches because they are expected to operate continuously, always searching for and downloading material. Cable units are somewhat lower, though all TiVo-like units typically draw from 20W–40W. &...
To read complete online articles, you need to sign up for an Online Subscription.
Once an order has been placed there is an automatic $10 processing fee that will be deducted with any cancellation.
The Home Energy Online articles are for personal use only and may not be printed for distribution. For permission to reprint, please send an e-mail to firstname.lastname@example.org.