Editorial: The Discreet Charm of Attics and Crawl Spaces
You would be professionally remiss if you did not read “Attics and Crawl Spaces” in this issue. The article by Terry Nordbye is a valuable reminder that home performance problems too often begin ...
For crawlspaces, as for the entire house, there are house-specific, local, and regional conditions to consider. [continue reading]
Experience is the best teacher, when it comes to crawlspaces. [continue reading]
Research shows that homeowners invite mold growth and serious health risks with a finished basement that has moisture problems. [continue reading]
Crawlspace Condensation Q:I was called to a doublewide mobile home to investigate a problem with a 4- year-old duct system (the original duct system was ... [continue reading]
Twenty years ago, standard concrete masonry block and cast-in-place (CIP) concrete basement foundation wall systems were the norm for single-family, low-rise housing. [continue reading]
It is common practice in California to put ducts outside the conditioned space, in attics and crawlspaces. These duct systems are typically 50%-70% efficient due mostly to air leakage and heat transfer losses, while sealed conditioned-space duct installations have efficiencies over 90%. O [continue reading]
If they are insulated at all, floors over crawlspaces or unconditioned spaces are insulated with fiberglass blankets or batts. [continue reading]
When coal-burning gravity furnaces were common, people spoke of feeding the "monster in the basement." The monster seemed defanged when gas and oil replaced coal, but still appeared fearsome. [continue reading]
First-Ever Comprehensive National Standard Practice Manual is Updated Guidebook for Energy Efficiency Cost-Benefit Analysis
The first-ever comprehensive national guide for utility-funded energy efficiency programs is now available to help utilities, regulators and other interested ...
Julie Caracino, HPC's Director of Research & Standards and Joe Cullen, HPC's Director of Policy & State Outreach talked with Ryan Miller ...