Choosing an IR Camera

Spotlight Article:

Choosing an IR Camera

Which equipment specifications should you consider before you buy?

Keep Reading

FILTER ARTICLES
stuff

Better Measurements, Better Models: Advances in Measuring and Predicting Thermal Performance

premium CONTENT
August 12, 2016

As 2-D and 3-D modeling to predict building performance becomes more widespread, we need to consider what data are feeding those models. At this point, modeling software has become quite sophisticated, and many users don&... [continue reading]

stuff

Get Started Using BEopt

Author: Eric Wilson
premium CONTENT
WEB ONLY
June 22, 2015

Download BEopt and EnergyPlus or DOE-2. Once they are installed, start BEopt and select either New Construction or Retrofit mode. Geometry screen. Click and drag to draw your building floor plan. Options screen. Select building ... [continue reading]

stuff

Using BEopt to Optimize Home Energy Performance

Author: Eric Wilson
premium CONTENT
June 20, 2015

The story of BEopt starts in October 2000, when a seminal two-day workshop was held at the National Renewable Energy Laboratory (NREL) to explore the then-novel concept of zero net energy (ZNE) buildings. Representatives from the ... [continue reading]

stuff

What's New with Manometers?

Author: Paul Raymer
free CONTENT
WEB ONLY
December 30, 2013

Imagine leaving your manometer in the basement while you are doing a combustion appliance zone (CAZ) test and then walking around the house, turning on fans, adjusting doors, energizing the air handler, all while you ... [continue reading]

stuff

Calibrating Measurement Tools

Author: Paul Raymer
premium CONTENT
April 28, 2013

To quote the wise Yogi Berra, “You’ve got to be very careful if you don’t know where you are going, because you might not get there.” In terms of ... [continue reading]

stuff

Testing Duct Testers

Author: Paul Raymer
premium CONTENT
June 29, 2012

According to DOE’s Building America program data, typical residential ductwork efficiency is about 67%. That means that if you install a 90% efficient furnace, your system efficiency would be just over 60%. Another way to look ... [continue reading]

Electric Vehicles Can Benefit All Utility Customers

Luke Tonachel

Electric Vehicles Can Benefit All Utility Customers

Despite the Trump administration’s apparent affection for the fossil fuels industry, individual states are looking at the numbers ...

Preliminary Energy Savings Announced for ASHRAE/IES 2016 Energy Standard

Jodi Scott

Preliminary Energy Savings Announced for ASHRAE/IES 2016 Energy Standard

More than 30 percent energy savings can be achieved using the 2016 version of Standard 90.1, according to recent analysis conducted by Pacific ...

Earn BPI CEU credits
HEP
Home Performance with EnergyStar

Harness the power of
HOME PERFORMANCE!

Get the Home Energy
e-newsletter

FREE!

SUBSCRIBE

NOW!